A 50mm grinding wheel with 18 forged and carbide tipped teeth has a 950mm hydraulically powered sweep and will grind from 400mm above ground to 380mm below ground. The screen, which folds flat against the side for transport, protects the operator controlling the STM27-500 and gives extensive working visibility. Overall width of machine is dependent on drive wheel configuration. 1045mm as photographed.
- 25/27hp Kohler Petrol
- 510mm Grinding wheel with 18 Carbide Tipped Teeth
- Electric Start
- Hydrostatic Drive and Rear Wheel Steer
- Hydraulic Sweep
| Petrol | |
| Length | 2520mm |
| Width | 1045mm |
| Height | 1740mm |
| Weight | 675Kg |
Specification |
|
| Engine Make | Kohler |
| Engine Power | 25/27hp Petrol |
| Weight | 675Kg |
| Height | 1740mm |
| Length | 2520mm |
| Forward Speed | 4Km/h |
| Brakes | Hydrostatic Brakes |
| Grinding Wheel Diameter | 500mm |
| Fuel Tank Capacity | 14 Litres Unleaded Petrol |
| Cutter Teeth | 18 Carbide Tipped |
| Gradient | 25° in all directions |
| Reach Below Ground Level | 380mm |
| Reach Above Ground Level | 450mm |
| Maximum Stump Size | No Limit |
| Width | 1045mm |
| Self Propelled System | Hydrostatic |
| Steering | Rear Hydraulic Axle |
| Cutting Sweep | 950mm |
| Starter | Electric |