Climbing Equipment

We supply a wide range of arborist climbing and rigging equipment. Please call for further details.

ISC Figure of 8 with wings

ISC Figure of 8 with wings

(Part No: CA-A07)

ISC Figure of 8 with wings

  • A high-spec "figure of 8" from ISC for controlled lowering and abseiling manufactured from high strength aluminium alloy.
  • Comes with a large eye with room for an extra karabiner and the wings prevent the rope rolling into a locked position.
  • Suitable for 9-13mm rope
  • Minimum breaking strain of 35kn.
  • Finish is hard anodised to 30 micron

View Large Image Of ISC%20Mini%20Rope%20Grab

ISC Mini Rope Grab

(Part No: CL-A07-RP203A)

Manufactured from high strength aluminium alloy to perform a variety of tasks particularly fall arrest, tensioning, line security and emergency ascending. EN567

View Large Image Of Petzl%20Ascender%20(left)

Petzl Ascender (left)

(Part No: CL-A04-B17L)

Toothed cam ascender. Aluminium construction with a rubber handle for grip and insulation. Can be used singly or together on a double line. Pre-drilled holes for attaching footloops, slings or straps. Rope diameter, 8-13mm. Conforms to EN567.

Product Specifications

Breaking Load Limit : 5 kN
Weight : 196 g

View Large Image Of Petzl%20Ascender%20(right)

Petzl Ascender (right)

(Part No: CL-A04-B17R)

Designed for ascending fixed ropes, with or without aid from the structure. Ergonomically designed handle for maximum grip for the hand and to maintain the handle aligned with the direction of pull. Elastomeric protective sleeve to provide grip and thermal insulation. Aluminium body. Toothed cam in chrome steel for optimal clamping as well as optimal sliding up the rope, whatever the condition of the rope. Spring loaded catch allows the cam to be held in the open position. This also lets the user put the unit on or off the rope with one hand. EN567

View Large Image Of Petzl%20Croll

Petzl Croll

(Part No: CL-A47-B16)

A chest mounted clamp for ascending rope. The spring loaded catch allows for ease of use. For use on ropes between 8mm & 13mm diameter. Certified to CE EN 567

View Large Image Of Petzl%20Macrograb

Petzl Macrograb

(Part No: CL-A06-B52)

Cammed rope grab. Grooves in the cam grip the rope firmly. Can be used as an ascender or lanyard adjuster. Rope diameter 12-19mm. Conforms to CE EN 567.
View Large Image Of Petzl%20Mini%20Traxion

Petzl Mini Traxion

(Part No: CL-A30)

Light-weight, compact, swing-sided, self-jamming pulley/rope clamp. Can also be used as an ascender. Toothed cam grips securely on the rope. Aluminium construction. Rope diameter 13mm. Conforms to EN 567.
View Large Image Of Petzl%20Stop

Petzl Stop

(Part No: CL-A20-D09)

A self braking descender. Swinging side plate makes it easy to install rope. Diagram engraved on the plate shows correct threading. For use on ropes between 9mm & 12mm. Certified to CE EN 341.